PLYWOOD FLOORING

A two plywood flooring is installed to raise the tent structure. A decking material is laid out on top of the plywood, and then the tent structure goes up followed by the branded roof vinyl.

HEIGHT DIFFERENCE

We had an 18" difference in height from the front decking area to the back of the tent. We corrected that with 4"x6" studs.

NESPRESSO SANTA BARBARA

Laying out the 2" x 6" frame for the flooring.

NESPRESSO SANTA BARBARA

Site for the Nespresso Tent at the Santa Barbara Polo Club.

Upper Liner

Detail of the upper ceiling liner for the Nespresso Pavillion.

Interior of the Nespresso Pavillion

The interior detail of the Nespresso pavillion we installed at the International Polo Center in Wellington Florida. The ceiling liner was made from Heavy Muslin FR and tensioned using 25cm Spannfix.

NESPRESSO PAVILLION

This is a semi-permanent structure designed and manufactured by Eventstar Structures in Miami, Florida.
Our involvement in this project was to design a tension ceiling liner constructed of FR Muslin.
The challenge in this project was to  create the liner in one piece completely flat. We achieved this by constructing the liner with grommets every 8 inches and tensioned using 25cm Spannfix.